American DJ Indoor Furnishings MIC160 User Manual

Micro Moon  
Introduction  
Unpacking: Every Micro Moon has been thoroughly tested and has  
been shipped in perfect operating condition. Carefully check the ship-  
ping carton for damage that may have occurred during shipping. If the  
carton appears to be damaged, carefully inspect your units for any  
damage and be sure all accessories necessary to operate the system  
have arrived intact. In the event damage has been found or parts are  
missing, please contact our toll free customer support number for fur-  
ther instructions. Please do not return the system to your dealer with-  
out first contacting customer support.  
Introduction: Thank you for purchasing the Micro Moon by ADJ Prod-  
ucts, LLC. This fixture comes with a bright 3 Watt LED to produce a  
spectacular moonflower effect, with multi-colored beams that move  
back-and-forth to the sound of music. The Micro Phase is a great effect  
that can be used at parties, karaoke events, small bars and clubs, and  
for home use.  
Customer Support: ADJ Products, LLC provides a toll free customer  
support line, to provide set up help and to answer any question should  
you encounter problems during your set up or initial operation. You  
suggestions. Service Hours are Monday through Friday 9:00 a.m. to  
5:00 p.m. Pacific Standard Time.  
Voice:  
Fax:  
E-mail:  
(800) 322-6337  
(323) 582-2941  
Warning! To prevent or reduce the risk of electrical shock or fire, do  
not expose this unit to rain or moisture.  
Caution! There are no user serviceable parts inside this unit. Do not  
attempt any repairs yourself, doing so will void your manufactures  
warranty. In the unlikely event your unit may require service please  
contact ADJ Products, LLC.  
User Instructions  
Please recycle the shipping carton whenever possible.  
1/13  
 
Micro Moon  
Warranty  
Micro Moon  
Notes  
MANUFACTURER’S LIMITED WARRANTY  
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products  
to be free of manufacturing defects in material and workmanship for a prescribed period from  
the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the  
product is purchased within the United States of America, including possessions and  
territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable  
evidence, at the time service is sought.  
B. For warranty service you must obtain a Return Authorization number (RA#) before sending back  
the product–please contact ADJ Products, LLC Service Department at 800-322-6337. Send the pro-  
duct only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs  
or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay  
return shipping charges only to a designated point within the United States. If the entire instrument is  
sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If  
any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for  
loss of or damage to any such accessories, nor for the safe return thereof.  
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any  
manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the  
product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior  
written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because  
not properly maintained as set forth in the instruction manual.  
D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check  
up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense  
with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by  
reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this  
warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole  
discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August  
15, 2012, and bear indentifying marks to that effect.  
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon it’s products  
without any obligation to include these changes in any products theretofore manufactured.  
No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with  
products described above. Except to the extent prohibited by applicable law, all implied warranties made  
by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness,  
are limited in duration to the warranty period set forth above. And no warranties, whether expressed or  
implied, including warranties of merchantability or fitness, shall apply to this product after said period  
has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is  
expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or  
damage, direct or consequential, arising out of the use of, or inability to use, this product.  
This warranty is the only written warranty applicable to ADJ Products, LLC Products and  
supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore  
published. This warranty was revised after December 1, 2012.  
MANUFACTURER’S LIMITED WARRANTY PERIODS:  
• Lighting Products = 1-year (365 days) Limited Warranty (Such as: Special Effect Lighting, Intelligent  
Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing,  
Lighting Stands etc. excluding LED, Laser Products and lamps)  
• Laser Products = 90-Day Limited Warranty  
• L.E.D. Products = 3-year (1095 days) Limited Warranty (excluding motors, PCB boards, and power  
supplies, which have a 1-year (365 day Limited Warranty) and batteries which have a 180 day  
limited warranty). Only the L.E.D.s carry a 3-year warranty  
 
Micro Moon  
Specifications  
MODEL:  
Micro Moon  
VOLTAGE:  
100V ~ 240V/50~60Hz  
DC6V 1.6A  
LED:  
1 x 3 Watt  
POWER DRAW:  
DIMENSIONS:  
10W  
7.75” (L) x 6.5” (W) x 5.5” (H)  
195 x 165 x 134mm  
2 Lbs/ 0.65 Kgs.  
1 AMP  
WEIGHT:  
FUSE:  
COLOR:  
Multi  
WORKING POSITION:  
WARRANTY:  
Any Safe Position  
3 Year (1095 Days)  
Auto Sensing Voltage: This fixture contains a automatic voltage  
switch, which will auto sense the voltage when it is plugged into  
the power source.  
Please Note: Specifications and improvements in the design of  
this unit and this manual are subject to change without any prior  
written notice.  
ADJ Products, LLC  
6122 S. Eastern Ave. Los Angeles, CA 90040 USA  
Tel: 323-582-2650 / Fax: 323-725-6100  
A.D.J. Supply Europe B.V.  
Junostraat 2  
6468 EW Kerkrade  
Netherlands  
Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99  
 

3M Marine Instruments eg3 User Manual
3M Respiratory Product 7190 User Manual
Airlink101 Switch ASW105 User Manual
Aiwa Stereo System XS DS70 User Manual
Alto Shaam Oven Cook and Hold Ovens User Manual
Amana Clothes Dryer W10150612A User Manual
American DJ DJ Equipment DJ Roller User Manual
American Standard Outdoor Shower 3232Y1ST User Manual
Ativa Paper Shredder 505SB User Manual
Behringer DJ Equipment EUROPOWER PMP518M User Manual